Sealers & Cleaners


MITEQ SEALERS AND CLEANERS FOR NATURAL STONE PRODUCTS

Most natural stone tiles and pavers are porous in nature which means they can soak water, grease, and stains which can leave them looking mottled and not the same as when bought new . Natural Stones last for generations but only if its looked after well. To keep the stone looking beautiful and avoid damage, natural stone tiles and pavers need to be sealed. At Indus Stones we use premium quality Sealers and Cleaners from MITEQ Why do we use Miteq Products? Miteq is a fully owned Australian manufacturing company which started life in the business of treating Masonry surfaces in both domestic and commercial settings.They manufacture sealers for all types of natural and man made stones ranging from Marble, Granite, Bluestone, Sandstone and other cementitious based products. Miteq have spent over 20 years developing and refining these products to perform to their utmost in the harsh Australian environment. Although Masonry products have proven themselves over a long period in Europe, Australia provides unique challenges requiring the innovation which makes this range possible and effective.

Types of Natural Stone Sealers

There are many different types of sealers available in the market today but they all fall into two main categories – penetrating sealers and coating or surface sealers. Penetrating sealer goes deep into the pores of the tiles, filling them up and therefore making it much harder for water or stains to seep into the tile. They still will over time but the process is much slower, giving you ample time to mop the spill up. Penetrating sealers retain the look of the tile as they don’t affect the appearance at all. A coating or surface sealer sits on top of the tile in order to provide a protective barrier. These Sealers comes in different finishes including matte, wet look, and glossy. Coating sealers do wear off over time so need to be reapplied.

Technical Advice

Please download the technical data sheets and problem solving guides that are available on this page for each product. If you have a problem or wish to get some in-depth technical advice we can arrange for a technical adviser from Miteq to contact you directly. Alternatively, go to: http://miteq.com.au/products/penetrating-sealers/ Click on the sealer you want and download Product Technical Data, Material Safety Data and Independent Testing Data.

SEALERS AND CLEANERS RANGE

Surface-Sealer-2022 Penetrating-Sealer-103 Penetrating-Sealer-1021 Cleaner-304 BR-128-Consolidator
Penetrating Sealer 103
  • Solvent based, natural look, superior level protective, penetrating sealer for granite, marble, natural stone, concrete, pressed pavers and reconstituted stone.
  • Sealer 103 is designed particularly for high level protection of dense surfaces (granite, bluestone etc), high traffic areas such as drives, patios and foyers, bathrooms and other areas requiring high level protection.
  • It is a natural look sealer for interior and exterior use. A two coat application, wet on wet, will give sufficient protection provided application guidelines are met.
The application of Sealer 103 will not affect the slip resistance of the surface. Available in 1, 4 & 20 Litre containers. Directions for use
  • Power wash surfaces to be treated.
  • Remove oil, grease and soil stains with the recommended Miteq cleaner.
  • Ensure surface is completely dry prior to sealing.
  • Use material directly from can. Do not dilute.
  • Always test a small area prior to commencement to ascertain the effect of the sealer on the surface.
  • Apply to the prepared surface by brush, solvent resistant roller or low pressure spray.
  • Apply evenly, do not allow sealer to pool.
  • Do not use above 30°C or below 10°C or if rain is imminent.
Sealer 103 can be re-applied at any time following initial application providing the surface has been suitably cleaned and loose material has been removed. The sealed surface will be suitable for use after 24 hours. Allow 3-4m2/litre per coat on porous surfaces and 5-6m2/litre on dense surfaces. Coverage will depend on surface porosity and substrate type. Exposure to water may cause material to cure in the container.  
Safety Care Product
Surface Sealer 202 Premium, solvent based, acrylic surface sealer for masonry, concrete, pressed pavers and reconstituted stone. Sealer 202 is a “wet look” surface sealer designed to deliver the maximum protection possible by this type of sealer. It has maximum UV stability making it the most durable in the Miteq range. Available in 4 & 20 Litre containers. Directions for use
  • Power wash surfaces to be treated.
  • Ensure surface is completely dry prior to sealing.
  • Use material directly from can. Do not dilute.
  • Always test a small area prior to commencement to ascertain the effect of the sealer on the surface.
  • Apply sealer to the prepared surface by brush, solvent resistant roller or low pressure spray.
  • Apply evenly, do not allow sealer to pool.
  • Recoat after six hours or when the first coat is firm enough for foot traffic.
  • The sealed surface will be suitable for use after 24 hours.
  • Do not use above 30°C or below 10°C or if rain is imminent.
  • Sealer 202 is available in gloss, matt and non-slip finish.
  • Sealer 202 is solvent sensitive, which means it can be re-applied at any time following initial application providing the surface has been suitably cleaned and loose material has been removed.
  • Allow 3-4m2/litre per coat on porous substrates and 8-10m2/litre on dense substrates. Coverage will depend on surface porosity and substrate type.
Read all warnings.
Safety Care Product Testing

GET A FREE QUOTE TODAY!

Say hello!

Visit our showroom

6 Orthla Ave, Heidelberg West
VIC 3081, Australia

Ph : 1300-973-938



Message